Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
My own Cutting Board Conditioner recipe. It utilizes, Beeswax, Carnauba Wax, Mineral Oil and Lemon Oil. Cutting boards are pre finished with a soaking in Mineral Oil to penetrate the wood followed up by applications of my wax finish. Prior to delivery, I give each board a coating and buff the finish down. If the board arrives with a slight oil/waxy feeling, that is normal.
Cutting boards are wood items and as such are subject to warping, cracking and splitting if not cared for properly. They should not ever be put in a dishwasher. HAND WASH ONLY.
Wash both sides of the board each time with a mild dish soap. Pat dry and allow to air dry out in the open preferably upright exposing both sides of the board to allow even drying.
Apply a coat of Board Conditioner from time to time as needed. A little goes a long way.
It’s common to have cut marks on the board once it’s begun its life. They can be removed or reduced if desired by lightly sanding the surface with a 200 grit sandpaper and work your way back up to 1000 grit to re achieve the original surface.
Cutting Board Conditioner arrives in a custom tin. Approximate size is 2” round. I include one free container with each cutting board purchase.
My own Cutting Board Conditioner recipe. It utilizes, Beeswax, Carnauba Wax, Mineral Oil and Lemon Oil. Cutting boards are pre finished with a soaking in Mineral Oil to penetrate the wood followed up by applications of my wax finish. Prior to delivery, I give each board a coating and buff the finish down. If the board arrives with a slight oil/waxy feeling, that is normal.
Cutting boards are wood items and as such are subject to warping, cracking and splitting if not cared for properly. They should not ever be put in a dishwasher. HAND WASH ONLY.
Wash both sides of the board each time with a mild dish soap. Pat dry and allow to air dry out in the open preferably upright exposing both sides of the board to allow even drying.
Apply a coat of Board Conditioner from time to time as needed. A little goes a long way.
It’s common to have cut marks on the board once it’s begun its life. They can be removed or reduced if desired by lightly sanding the surface with a 200 grit sandpaper and work your way back up to 1000 grit to re achieve the original surface.
Cutting Board Conditioner arrives in a custom tin. Approximate size is 2” round. I include one free container with each cutting board purchase.